Shop For

Contact us at M-TEST

281.359.2215

Magnetic Pull Off Gauge (Banana Gauge)

Part No.: DF-FM/GM/G


Magnetic Pull Off Gauge (Banana Gauge)

Price: $350.00
Qty: - +
   - OR -   

 

 
PosiTest

Magnetic pull-off thickness gauge for the Non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating, etc.) on STEEL.


PosiTest - Coating thickness gage for non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating,&more) on steelACCURACY

DURABILITY

  • Extra rugged gauge housing, not affected by mechanical shock, water, acid or solvents
  • Unique overall gauge design, fully supported, positive positioning, no pivoting tendencies during measurement
  • Gage can be used fully supported or with only the front probe area contacting the surface
  • Functions on a permanent rare-earth cobalt magnet, no battery
  • Explosion Proof - Refinery safe
  • 2 year warranty

EASY TO USEPosiTest - Coating thickness gage for non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating,&more) on steel

  • Positive visual and audible indicators to designate when thickness reading is established
  • "V" grooves in probe housing and Gauge base allow correct positioning on cylindrical objects
  • Compact, lightweight, precisely balanced, Independent of gravity - Gauge can be used in any position
  • GO / NO-GO button can be pre-set for rapid measurement
  • Probe contact and dial rotation all in a one-finger operation
  • Gauge is furnished with wrist strap and instructions in a high quality leather case with belt loops for your convenience

Available PosiTest models

 

For: Hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings on steel.
 
Scale FM0-80 mils
Tolerance:0.2 mils up to 4 mils
5% of the reading over 4 mils
For: Electroplating, thin paint films, phosphating on steel.
 
Scale GM0-8 mils
Tolerance:0.04 mils up to 0.8 mils
5% of the reading over 0.8 mils
PosiTest F - Ideal for measuring coating thickness of hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings on steel. (microns)
Scale F0-2000 m
Tolerance:5 m up to 100 m
5% of the reading over 100 m
PosiTest GM - Ideal for measuring coating thickness of electroplating, thin paint films, phosphating on steel. (microns)
Scale G0-200 m
Tolerance:1 m up to 20 m
5% of the reading over 20 m

 

Shipping Weight:   2.00 lbs
Manufacturer:   Defelsko
Manufacturer Part No.:   DF-FM/GM/G
Part No.:   DF-FM/GM/G

Please enter your information